0102030405
AH32 Shipping Steel Plate (8mm-800mm) from China Suppliers and Factory - High Quality and Fast Delivery
Product Description
Product Parameter
| Material | AH32 Shipping steel plate |
| Thickness | 8mm-800mm |
| Width | 1500mm-4200mm |
| Length | 6000mm-18000mm |
| Delivery condition | Hot rolled, controlled rolled, or normalized |
| Cutting service | Large steel plate cut to flat plate sizes, or cut to any size by drawing |
| Deep processing | After cutting large plate into the general sizes by drawing, milling and grinding, and make angles, polishing, and make special parts |
| Carbon steel plate | A283GR.C/GR.D, ASTMA36, A573GR.58, A573GR.65, A573GR.70. SS400, SM400A, SM400B. SM400C, S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S275N, S275NL, S275M, S275ML, 250, 250L0, 250L15, Q235A/B/C/D, Q275A/B/C/D |
| Low Alloy steel plate | A572GR.50, A572GR.60, SS490, SM490N/NL, S460N/NL, S355M/ML, S420M/ML, S460M/ML, S500Q/QL/QL1, S550Q/QL/QL1, S620Q/QL/QL1, S690Q/QL/QL1, S355G8+N, 350, 350L0, 350L15, Q345A, Q345B, Q345C, Q345D, Q345E, Q390A, Q390B, Q390C, Q390D, Q390E, Q420A, Q420B, Q420C, Q420D, Q420E, Q460C, Q460D, Q460E, Q500C, Q500D, Q500E, Q550C, Q550D, Q550E, Q620C, Q620D, Q620E, Q690C, Q690D, Q690E, 890D, Q890E, Q960D, Q960E, XGCFQ500D, XGCFQ500E. |
| General / High / Ultra High Strength Ship Plate | A, B, C, D, E, A32, D32, E32, F32, A36, D36, E36, F36, A40, D40, E40, F40, A131A, A131B, A131D, A131E, AH32, DH32, EH32, AH36, DH36, EH36, AH40, DH40, EH40, NVA420, D420, E420, NVA460, NVD460, NVE460, NVA500, NVD500, NVE500, NVA550, NVD550, NVE550. |
| Ship Pressure Vessel Plate | NV360, NV410, NV460, NV490, NV510, LR360, LR360FG, LR410, LR410FG, LR460FG, LR490FG, LR510FG. |
| Bridge Plate | Q235QC/D/E, Q345QC/D/E, Q370QC/D/E, Q42QC/D/E, Q460QC/D/E, Q500QD/E, Q550QD/E, Q620QD/E, Q690QD/E, A709-50T-1/50T-2/50T-3/50F-1/50F-2/50F-3, A709-50W-A/B/C-F1/F2/F3-T1/T2/T3 |
| Boiler Pressure Vessel Plate | Q245R, Q345R, Q370R, 15CrMoR, 18MnMoNbR, 13MnNiMoR, 12Cr1MoVR, 12Cr2Mo1R, 14CrMoR, 16MnDR, 09MnNiDR, 15MnNiDR, 07MnCrMoVR, 07MnNiCrMoVDR/12MnNiVR, Q245R, Q345R, 16MNDR.P235GH, P265GH, P395GH, P355GH, 16Mo3, P275NH/NL1/NL2, P355N/NH/NL1/NL2, P460NH/NL1/NL2, P355M/ML1/ML2, P420M/ML1/ML2, P460m/ml1/ml2, P355Q/QH/QL1/QL2, P460Q/QH/QL1/QL2, P500Q/QH/QL1/QL2, P690Q/QH/QL1/QL2, 10CrMo9-10, 11MnNi5-3, 13CrMo4-5, 13CrMoSi5-5, 13MnNi6-3, 18MnMo4-5, 20MnMoNi4-5, (S)A204Gr.A/Gr.B/Gr.C, (S)A285Gr.A/Gr.B/Gr.C, (S)A299Gr.A/Gr.B, A302Gr.A/Gr.B/Gr.C/Gr.D, A387Gr.2/Gr.11/Gr.22, ASTMA455, (S)A515Gr.60/65/70, (S)A516Gr.55/60/65/70, (S)A516Gr.60(HIC), (S)A516Gr.60(R-HIC), (S)A517Gr.B/Gr.H, (S)A533Gr.A/Gr.B/Gr.C, (S)A537CL.1/CL.2/CL.3, ASTMA612, (S)A662Gr.A/Gr.B/Gr.C, (S)A737Gr.B/Gr.C, A738Gr.A/Gr.B/Gr.C, (S)A841Gr.A/Gr.B/Gr.C/Gr.D, SB410, SB450, SB480, SB450M/480M, SEV245/295/345, SBV1A/1B, SBV2/3, SGV410/450/480, SPV235/315/355/410, SPV450/490, SQV1A/1B/2A/2B/3A/3B |
| High-rise Building Plate | Q235GJB/C/D/E, Q345GJB/C/D/E, Q390GJC/D/E, Q420GJC/D/E, SN400A/B/C, SN490B/C |
| COMMODITY NAME | GRADES |
|---|---|
| Boiler and Pressure Vessel Steel Plates | Q245R, Q345R, Q370R, 15CrMoR, 18MnMoNbR, 13MnNiMoR, 12Cr1MoVR, 12Cr2Mo1R, 14CrMoR, 16MnDR, 09MnNiDR, 15MnNiDR, 07MnCrMoVR, 07MnNiCrMoVDR/12MnNiVR, SB410, SB450, SB480, SPV235, SPV315, SPV355, SPV410, SPV490, SGV41O, SGV450, SGV480, SBV1A, SBV1B, SBV2, SBV3, SEV245, SEV295, SEV345, HI, HII, 10CrMo910, 15Mo3, 13CrMo44, 19Mn6, BHW35/13MnNiMo54, 1Cr0.5Mo, 2.25Cr1Mo, 1.25Cr0.5Mo, Q245R|Q345R(HIC)/(R-HIC), (s)A229M, (s)A515M(Gr.A,B,C), (s)A387M(GR11,12,22), (s)A537M(GL1,GL2), (s)A662M(GrA,B,C), (s)A302M(GraA,B,C,D), (s)A737M(Gr.B,C), (s)A738M(Gr.A,B,C), (s)A533M(Ⅰ,Ⅱ), (s)A285Gr:A,B,C,D, P235GH, P265GH, P395GH, P355GH, 16Mo3, A42, A52, A48, 20MnHR, Q245HR, Q345HR, KP42, AISI4140, A48CPR, SA612M, 161G430, WDB620/Q500FC |
| Low Alloy High Strength Steel Plate | 12Mn, 15MnVN, 16Mn, 15MnV, 14MnNb, Q295(A,B), Q345(A,B,C,D,E), Q390(A,B,C,D,E), Q420(A,B,C,D,E), Q460(C,D,E), Q500(D,E), Q550(D,E), Q620(D,E), Q690(D,E), SM490(A,B,C), SM490Y(A,B), SM520(B,C), SM570, St44-3, St52-3, St50-2, St60-2, St70-2, StE315, StE355, StE380, STe420, StE460, StE500, A572M(Gr42.50,60,65), A633M9(A,B,C,D,E), S275(JR,JO,J2G3,J2G4), S355(JR,JO,J2G3,J2G4,E395,E355,E360), S275N, S275NL, S355N, S355NL, S420N, S420NL, S460N, S460NL, 50(A,B,C,D,DD,EE,F), 43(A,B,C,D,EE), 55(C,EE,F), Fe430(A,B,C,D), Fe510(B,C,D), WH60, WH410LK(BB41BF), WH490LK(BB503), Q550CFC, WDB690, WDB780, WH70, WH80 IE0650, IE1006, SHT60 |
| Corrision Resistance Steel Plate | 08Cu, 16MnCu, Q245R|Q345R(HIC)\(R-HIC), St37-3Cu3, A588M(A,B,C,K), A242MCL.2, Cor-TenB, 10CrMoAL, 16CuCr, 12MnCuCr, 15MnCuCr-QT, 09CuPCrNi, SMA400(AW,BW,CW), SMA400(AP,BP,CP), SMA490(AW,BW,CW), SMA490(AP,BP,CP), SMA570W, SMA570P, Fe235W, Fe355W, WR50B, WR50C |
| Bridge Steel Plate | 16q, 16Mnq, 16MnCuq/15MnVq, 15MnVNq, 14MnNbp/Q345q, Q370q, Q420q, A709M(Gr36,50,50W,70W) |
| Construction, Structural Steel Plate | Q235GJ, Q345GJC.D-Z35, Q390GJ, Q460GJC, SN400(A,B,C), SN490(B,C), 275(D,E,EZ), 355(D,E,EM), 450(EM,EMZ) |
| Alloy Structure Steel Plate | 15CrMo, 20CrMo, 30CrMo, 35CrMo, 20Cr, 40Cr, 20Mn2, 40Mn2, 20CrMnMo, 12Cr1MoV, 20MnSi, 30CrMnSiA, 12CrMoVNi(RQ65), 50Mn2V, 42CrMo, 25CrMo4, 34CrMo4, 42CrMo4 |
| Mold Wear Steel Plate | P20, 718, P80, WSM30A, S45C-S55C, 45-55, 50Mn, SM45-SM55, SM3Cr2Mo, SM3Cr2Ni1Mo, NM360, NM400 |
| Carbon Structure Steel Plate | Q235-Q275, 10-55, 20Mn-50Mn, SS400/SM400(A,B) |
Manufacturing Technique
Cutting large steel plates as your requirements to make the surface of the plate bright by milling and grinding, also can make holes and make angle degrees, and can weld by your drawing.
For the thickness under 30mm, cutting by laser; For thickness over 30mm, mainly OXY-cut, flame cutting.
For the thickness 200mm steel plate, because during the flame cutting, the temperature is very high, so the cutting parts steel plate might be broken at the angle part, then our workers will repair the angles to be good condition.
Product Testing
Carbon (C)
1. Improve the deformation resistance and tensile strength of the blade.
2. Enhance hardness and improve wear resistance.
Chromium (Cr)
1. Enhance hardness, tensile strength and toughness.
2. Anti-wear and corrosion resistance.
Cobalt (Co)
1. Increase the hardness and strength so that it can withstand high temperature quenching.
2. Used to enhance certain individual properties of other elements in more complex alloys.
Copper (Cu)
1. Enhance corrosion resistance.
2. Enhance wear resistance.
Manganese (Mn)
1. Increase the quenchability, wear resistance and tensile strength.
2. Removal of oxygen from molten metal by separate oxidation and separate vaporization.
3. When added in large quantities, the hardness is enhanced, but the brittleness is improved.
Molybdenum (Mo)
1. Enhanced strength, hardness, quenchability and toughness.
2. Improve machinability and corrosion resistance.
Nickel (Ni)
1. Enhance strength, hardness and corrosion resistance.
Phosphorus (P)
1. Enhanced strength, machinability and hardness.
2. When the concentration is too large, it is easy to crack.
Silicon (Si)
1. Enhanced ductility.
2. Increase the tensile strength.
3. Removal of oxygen from molten metal by separate oxidation and separate vaporization.
Sulphur (S)
1. Small amount used to improve machinability.
Tungsten (W)
1. Increases strength, hardness and toughness.
Vanadium (V)
1. Increases strength, hardness and seismic resistance.
Frequently Asked Questions (FAQ)
What are the available dimensions for the AH32 shipping steel plate?
The AH32 shipping steel plate is available in thicknesses ranging from 8mm to 800mm, widths from 1500mm to 4200mm, and lengths from 6000mm to 18000mm.
What cutting technologies are used for different plate thicknesses?
For steel plates with a thickness under 30mm, we utilize laser cutting. For plates with a thickness over 30mm, we primarily use OXY-cut or flame cutting techniques.
What deep processing services do you offer?
We offer a variety of deep processing services including cutting large plates to custom sizes based on drawings, milling, grinding, creating angle degrees, making holes, polishing, welding, and manufacturing specialized parts.
How do you handle potential angle damage during the cutting of thick plates?
During the flame cutting of very thick plates (such as 200mm), the extremely high temperatures can sometimes cause the steel plate to break at the angle parts. When this occurs, our workers manually repair the angles to restore them to good condition.
Why is the chemical composition of elements like Carbon and Chromium tested?
Testing elements is crucial for quality control: Carbon (C) is tested to improve deformation resistance, tensile strength, and hardness; Chromium (Cr) is tested to enhance toughness, tensile strength, hardness, and to provide anti-wear and corrosion resistance.