0102030405
China AH32 Shipping Steel Plate Suppliers - Factory Direct, Thickness 8mm-800mm, Fast Delivery & Quality Assurance
Product Description
Product Parameter
| Material | AH32 Shipping steel plate |
| Thickness | 8mm-800mm |
| Width | 1500mm-4200mm |
| Length | 6000mm-18000mm |
| Delivery condition | Hot rolled, controlled rolled, or normalized |
| Cutting service | Large steel plate cut to flat plate sizes, or cut to any size by drawing |
| Deep processing | After cutting large plate into the general sizes by drawing, milling and grinding, and make angles, polishing, and make special parts |
| Carbon steel plate | A283GR.C/GR.D, ASTMA36, A573GR.58, A573GR.65, A573GR.70. SS400, SM400A, SM400B. SM400C, S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S275N, S275NL, S275M, S275ML, 250, 250L0, 250L15, Q235A/B/C/D, Q275A/B/C/D |
| Low Alloy steel plate | A572GR.50, A572GR.60, SS490, SM490N/NL, S460N/NL, S355M/ML, S420M/ML, S460M/ML, S500Q/QL/QL1, S550Q/QL/QL1, S620Q/QL/QL1, S690Q/QL/QL1, S355G8+N, 350, 350L0, 350L15, Q345A, Q345B, Q345C, Q345D, Q345E, Q390A, Q390B, Q390C, Q390D, Q390E, Q420A, Q420B, Q420C, Q420D, Q420E, Q460C, Q460D, Q460E, Q500C, Q500D, Q500E, Q550C, Q550D, Q550E, Q620C, Q620D, Q620E, Q690C, Q690D, Q690E, 890D, Q890E, Q960D, Q960E, XGCFQ500D, XGCFQ500E. |
| General/High/Ultra High Strength ship plate | A, B, C, D, E, A32, D32, E32, F32, A36, D36, E36, F36, A40, D40, E40, F40, A131A, A131B, A131D, A131E, AH32, DH32, EH32, AH36, DH36, EH36, AH40, DH40, EH40, NVA420, D420, E420, NVA460, NVD460, NVE460, NVA500, NVD500, NVE500, NVA550, NVD550, NVE550. |
| Ship pressure vessel plate | NV360, NV410, NV460, NV490, NV510, LR360, LR360FG, LR410, LR410FG, LR460FG, LR490FG, LR510FG |
| Bridge plate | Q235QC/D/E, Q345QC/D/E, Q370QC/D/E, Q420QC/D/E, Q460QC/D/E, Q500QD/E, Q550QD/E, Q620QD/E, Q690QD/E, A709-50T-1/50T-2/50T-3/50F-1/50F-2/50F-3, A709-50W-A/B/C-F1/F2/F3-T1/T2/T3 |
| Boiler pressure vessel plate | Q245R, Q345R, Q370R, 15CrMoR, 18MnMoNbR, 13MnNiMoR, 12Cr1MoVR, 12Cr2Mo1R, 14CrMoR, 16MnDR, 09MnNiDR, 15MnNiDR, 07MnCrMoVR, 07MnNiCrMoVDR/12MnNiVR, Q245R, Q345R, 16MNDR, P235GH, P265GH, P395GH, P355GH, 16Mo3, P275NH/NL1/NL2, P355N/NH/NL1/NL2, P460NH/NL1/NL2, P355M/ML1/ML2, P420M/ML1/ML2, P460m/ml1/ml2, P355Q/QH/QL1/QL2, P460Q/QH/QL1/QL2, P500Q/QH/QL1/QL2, P690Q/QH/QL1/QL2, 10CrMo9-10, 11MnNi5-3, 13CrMo4-5, 13CrMoSi5-5, 13MnNi6-3, 18MnMo4-5, 20MnMoNi4-5, (S)A204Gr.A/Gr.B/Gr.C, (S)A285Gr.A/Gr.B/Gr.C, (S)A299Gr.A/Gr.B, A302Gr.A/Gr.B/Gr.C/Gr.D, A387Gr.2/Gr.11/Gr.22, ASTMA455, (S)A515Gr.60/65/70, (S)A516Gr.55/60/65/70, (S)A516Gr.60(HIC), (S)A516Gr.60(R-HIC), (S)A517Gr.B/Gr.H, (S)A533Gr.A/Gr.B/Gr.C, (S)A537CL.1/CL.2/CL.3, ASTMA612, (S)A662Gr.A/Gr.B/Gr.C, (S)A737Gr.B/Gr.C, A738Gr.A/Gr.B/Gr.C, (S)A841Gr.A/Gr.B/Gr.C/Gr.D, SB410, SB450, SB480, SB450M/480M, SEV245/295/345, SBV1A/1B, SBV2/3, SGV410/450/480, SPV235/315/355/410, SPV450/490, SQV1A/1B/2A/2B/3A/3B |
| High-rise Building Plate | Q235GJB/C/D/E, Q345GJB/C/D/E, Q390GJC/D/E, Q420GJC/D/E, SN400A/B/C, SN490B/C |
| COMMODITY NAME | GRADES |
|---|---|
| Boiler and Pressure Vessel Steel Plates | Q245R, Q345R, Q370R, 15CrMoR, 18MnMoNbR, 13MnNiMoR, 12Cr1MoVR, 12Cr2Mo1R, 14CrMoR |
| 16MnDR, 09MnNiDR, 15MnNiDR | |
| 07MnCrMoVR, 07MnNiCrMoVDR/12MnNiVR | |
| SB410, SB450, SB480 | |
| Pressure Vessel Grades (Cont.) | SPV235, SPV315, SPV355, SPV410, SPV490 |
| SGV410, SGV450, SGV480 | |
| SBV1A, SBV1B, SBV2, SBV3 | |
| SEV245, SEV295, SEV345 | |
| HI, HII, 10CrMo910, 15Mo3, 13CrMo44, 19Mn6 | |
| BHW35/13MnNiMo54 | |
| 1Cr0.5Mo, 2.25Cr1Mo, 1.25Cr0.5Mo, Q245R|Q345R(HIC)/(R-HIC) | |
| (s)A229M, (s)A515M(Gr.A,B,C), (s)A387M(GR11,12,22), (s)A537M(GL1,GL2), (s)A662M(GrA,B,C), (s)A302M(GraA,B,C,D), (s)A737M(Gr.B,C), (s)A738M(Gr.A,B,C), (s)A533M(I,II), (s)A285Gr:A,B,C,D | |
| P235GH, P265GH, P395GH, P355GH, 16Mo3 | |
| A42, A52, A48 | |
| 20MnHR, Q245HR, Q345HR, KP42, AISI4140, A48CPR, SA612M | |
| 161G430 | |
| WDB620/Q500FC | |
| Low Alloy High Strength Steel Plate | 12Mn, 15MnVN, 16Mn, 15MnV, 14MnNb |
| Q295(A,B), Q345(A,B,C,D,E), Q390(A,B,C,D,E), Q420(A,B,C,D,E), Q460(C,D,E) | |
| Q500(D,E), Q550(D,E), Q620(D,E), Q690(D,E) | |
| SM490(A,B,C), SM490Y(A,B), SM520(B,C), SM570 | |
| St44-3, St52-3, St50-2, St60-2, St70-2 | |
| StE315, StE355, StE380, STe420, StE460, StE500 | |
| Structural Grades (Cont.) | A572M(Gr42.50,60,65), A633M9(A,B,C,D,E) |
| S275(JR,JO,J2G3,J2G4), S355(JR,JO,J2G3,J2G4,E395,E355,E360) | |
| S275N, S275NL, S355N, S355NL, S420N, S420NL, S460N, S460NL | |
| 50(A,B,C,D,DD,EE,F), 43(A,B,C,D,EE), 55(C,EE,F) | |
| Fe430(A,B,C,D), Fe510(B,C,D) | |
| WH60, WH410LK(BB41BF), WH490LK(BB503), Q550CFC | |
| WDB690, WDB780, WH70, WH80 IE0650, IE1006, SHT60 | |
| Corrosion Resistance Steel Plate | 08Cu, 16MnCu, Q245R|Q345R(HIC)\(R-HIC) |
| St37-3Cu3 | |
| A588M(A,B,C,K), A242MCL.2 | |
| Cor-TenB, 10CrMoAL | |
| 16CuCr, 12MnCuCr, 15MnCuCr-QT, 09CuPCrNi | |
| SMA400(AW,BW,CW), SMA400(AP,BP,CP), SMA490(AW,BW,CW), SMA490(AP,BP,CP), SMA570W, SMA570P | |
| Fe235W, Fe355W, WR50B, WR50C | |
| Bridge Steel Plate | 16q, 16Mnq, 16MnCuq/15MnVq, 15MnVNq, 14MnNbp/Q345q, Q370q, Q420q |
| A709M(Gr36, 50, 50W, 70W) | |
| Construction, Structural Steel Plate | Q235GJ, Q345GJC.D-Z35, Q390GJ, Q460GJC |
| SN400(A,B,C), SN490(B,C) | |
| 275(D,E,EZ), 355(D,E,EM), 450(EM,EMZ) | |
| Alloy Structure Steel Plate | 15CrMo, 20CrMo, 30CrMo, 35CrMo, 20Cr, 40Cr, 20Mn2, 40Mn2, 20CrMnMo, 12Cr1MoV, 20MnSi, 30CrMnSiA, 12CrMoVNi(RQ65), 50Mn2V, 42CrMo |
| 25CrMo4, 34CrMo4, 42CrMo4 | |
| Mold Wear Steel Plate | P20, 718, P80, WSM30A |
| S45C-S55C | |
| 45-55, 50Mn, SM45-SM55, SM3Cr2Mo, SM3Cr2Ni1Mo | |
| NM360, NM400 | |
| Carbon Structure Steel Plate | Q235-Q275 |
| 10-55, 20Mn-50Mn | |
| SS400/SM400(A,B) |
Manufacturing Technique
Cutting large steel plates as your requirements to make the surface of the plate bright by milling and grinding, also can make holes and make angle degrees, and can weld by your drawing.
For the thickness under 30mm, cutting by laser; For thickness over 30mm, mainly OXY-cut, flame cutting.
For the thickness 200mm steel plate, because during the flame cutting, the temperature is very high, so the cutting parts steel plate might be broken at the angle part, then our workers will repair the angles to be good condition.
Product Testing
Carbon (C)
- Improve the deformation resistance and tensile strength of the blade.
- Enhance hardness and improve wear resistance.
Chromium (Cr)
- Enhance hardness, tensile strength and toughness.
- Anti-wear and corrosion.
Cobalt (CO)
- Increase the hardness and strength so that it can withstand high temperature quenching.
- Used to enhance certain individual properties of other elements in more complex alloys.
Copper (Cu)
- Enhance corrosion resistance.
- Enhance wear resistance.
Manganese (Mn)
- Increase the quenchability, wear resistance and tensile strength.
- Removal of oxygen from molten metal by separate oxidation and separate vaporization.
- When added in large quantities, the hardness is enhanced, but the brittleness is improved.
Molybdenum (Mo)
- Enhanced strength, hardness, quenchability and toughness.
- Improve machinability and corrosion resistance.
Nickel (Ni)
- Enhance strength, hardness and corrosion resistance.
Phosphorus (P)
- Enhanced strength, machinability and hardness.
- When the concentration is too large, it is easy to crack.
Silicon (Si)
- Enhanced ductility.
- Increase the tensile strength.
- Removal of oxygen from molten metal by separate oxidation and separate vaporization.
Sulphur (S)
- Small amount used to improve machinability.
Tungsten (W)
- Increases strength, hardness and toughness.
Vanadium (V)
- Increases strength, hardness and seismic resistance.
Frequently Asked Questions (FAQ)
What are the dimensions and delivery conditions for AH32 Shipping steel plates?
AH32 Shipping steel plates are available in thicknesses from 8mm to 800mm, widths from 1500mm to 4200mm, and lengths from 6000mm to 18000mm. They can be delivered in hot rolled, controlled rolled, or normalized conditions.
What custom cutting and deep processing services do you offer?
We cut large steel plates to flat plate sizes or any specific size according to your drawings. Deep processing services include milling, grinding, making angles, polishing, drilling holes, welding, and producing special parts.
How does the thickness of the steel plate affect the cutting method?
For steel plates with a thickness under 30mm, laser cutting is utilized. For thicknesses exceeding 30mm, we primarily use OXY-cut and flame cutting.
How do you ensure the quality of flame-cut 200mm thick steel plates?
During the flame cutting of 200mm thick steel plates, very high temperatures are involved, which can sometimes cause the cutting parts to break at the angles. To ensure high quality, our workers manually repair the angles to bring them back to good condition.
Which elements are tested to enhance the corrosion resistance of the steel?
Chromium (Cr), Copper (Cu), Molybdenum (Mo), and Nickel (Ni) are key elements tested and utilized to enhance the corrosion and wear resistance of our steel plates.