0102030405
China AH32 Shipping Steel Plate Suppliers - High-Quality Factory Direct Plates (Thickness 8mm-800mm)
Product Description
Product Parameter
| Material | AH32 Shipping steel plate |
|---|---|
| Thickness | 8mm-800mm |
| Width | 1500mm-4200mm |
| Length | 6000mm-18000mm |
| Delivery condition | Hot rolled, controlled rolled, or normalized |
| Cutting service | Large steel plate cut to flat plate sizes, or cut to any size by drawing |
| Deep processing | After cutting large plate into the general sizes by drawing, milling and grinding, and make angles, polishing, and make special parts |
| Carbon steel plate | A283GR.C/GR.D, ASTMA36, A573GR.58, A573GR.65, A573GR.70. SS400, SM400A, SM400B. SM400C, S235JR, S235J0, S235J2, S275JR, S275J0, S275J2, S275N, S275NL, S275M, S275ML, 250, 250L0, 250L15, Q235A/B/C/D, Q275A/B/C/D |
| Low Alloy steel plate | A572GR.50, A572GR.60, SS490, SM490N/NL, S460N/NL, S355M/ML, S420M/ML, S460M/ML, S500Q/QL/QL1, S550Q/QL/QL1,S620Q/QL/QL1, S690Q/QL/QL1, S355G8+N, 350, 350L0, 350L15, Q345A, Q345B, Q345C, Q345D, Q345E, Q390A, Q390B, Q390C, Q390D, Q390E, Q420A, Q420B, Q420C, Q420D, Q420E, Q460C, Q460D, Q460E, Q500C, Q500D, Q500E, Q550C, Q550D, Q550E, Q20C, Q620D, Q620E, Q690C, Q690D, Q690E, 890D, Q890E,Q960D, Q960E, XGCFQ500D, XGCFQ500E. |
| General Strength ship plate, high strength ship plate, ultra high strength ship plate | A,B, C, D, E, A32,D32, E32, F32, A36, D36, E36, F36, A40,D40, E40, F40, A131A, A131B, A131D, A131E, AH32, DH32, EH32, AH36,DH36, EH36, AH40, DH40, EH40, NVA420, D420, E420, NVA460, NVD460, NVE460,NVA500, NVD500, NVE500, NVA550, NVD550, NVE550. |
| Ship pressure vessel plate | NV360, NV410, NV460, NV490, NV510, LR360, LR360FG, LR410, LR410FG, LR460FG, LR490FG, LR510FG |
| Bridge plate | Q235QC/D/E, Q345QC/D/E, Q370QC/D/E, Q42QC/D/E, Q460QC/D/E, Q500QD/E, Q550QD/E, Q620QD/E, Q690QD/E, A709-50T-1/50T-2/50T-3/50F-1/50F-2/50F-3, A709-50W-A/B/C-F1/F2/F3-T1/T2/T3 |
| Boiler pressure vessel plate | Q245R,Q345R,Q370R,15CrMoR,18MnMoNbR,13MnNiMoR, 12Cr1MoVR,12Cr2Mo1R,14CrMoR,16MnDR,09MnNiDR,15MnNiDR, 07MnCrMoVR,07MnNiCrMoVDR/12MnNiVR, Q245R, Q345R, 16MNDR.P235GH,P265GH,P395GH,P355GH,16Mo3, P275NH/NL1/NL2, P355N/NH/NL1/NL2, P460NH/NL1/NL2, P355M/ML1/ML2, P420M/ML1/ML2,P460m/ml1/ml2, P355Q/QH/QL1/QL2, P460Q/QH/QL1/QL2, P500Q/QH/QL1/QL2,P690Q/QH/QL1/QL2, 10CrMo9-10, 11MnNi5-3, 13CrMo4-5, 13CrMoSi5-5, 13MnNi6-3, 18MnMo4-5, 20MnMoNi4-5. (S)A204Gr.A/Gr.B/Gr.C (S)A285Gr.A/Gr.B/Gr.C (S)A299Gr.A/Gr.B,A302Gr.A/Gr.B/Gr.C/Gr.D, A387Gr.2/Gr.11/Gr.22. ASTMA455 (S)A515Gr.60/65/70, (S)A516Gr.55/60/65/70, (S)A516Gr.60(HIC), (S) A516Gr.60(R-HIC) (S)A517Gr.B/Gr.H (S)A533Gr.A/Gr.B/Gr.C (S)A537CL.1/CL.2/CL.3, ASTMA612, (S)A662Gr.A/Gr.B/Gr.C (S)A737Gr.B/Gr.C A738Gr.A/Gr.B/Gr.C (S)A841Gr.A/Gr.B/Gr.C/Gr.D SB410,SB450,SB480, SB450M/480M, SEV245/295/345, SBV1A/1B, SBV2/3, SGV410/450/480,SPV235/315/355/410, SPV450/490, SQV1A/1B/2A/2B/3A/3B |
| High-rise Building Plate | Q235GJB/C/D/E. Q345GJB/C/D/E,Q390GJC/D/E, Q420GJC/D/E, SN400A/B/C, SN490B/C |
| COMMODITY NAME | GRADES |
|---|---|
| Boiler and Pressure Vessel Steel Plates | Q245R,Q345R,Q370R,15CrMoR,18MnMoNbR,13MnNiMoR, 12Cr1MoVR,12Cr2Mo1R,14CrMoR |
| 16MnDR,09MnNiDR,15MnNiDR | |
| 07MnCrMoVR,07MnNiCrMoVDR/12MnNiVR | |
| SB410,SB450,SB480 | |
| Other Vessel Steel Specifications | SPV235,SPV315,SPV355,SPV410,SPV490 |
| SGV41O,SGV450,SGV480 | |
| SBV1A,SBV1B,SBV2,SBV3 | |
| SEV245,SEV295,SEV345 | |
| HI,HII,10CrMo910,15Mo3,13CrMo44,19Mn6 | |
| BHW35/13MnNiMo54 | |
| 1Cr0.5Mo,2.25Cr1Mo,1.25Cr0.5Mo,Q245R|Q345R(HIC)/(R-HIC) | |
| (s)A229M, (s)A515M(Gr.A,B,C), (s)A387M(GR11,12,22), (s)A537M(GL1,GL2), (s)A662M(GrA,B,C), (s)A302M(GraA,B,C,D), (s)A737M(Gr.B,C), (s)A738M(Gr.A,B,C), (s)A533M(Ⅰ,Ⅱ), (s)A285Gr:A,B,C,D | |
| P235GH,P265GH,P395GH,P355GH,16Mo3 | |
| A42,A52,A48 | |
| 20MnHR,Q245HR,Q345HR,KP42,AISI4140,A48CPR,SA612M | |
| 161G430 | |
| WDB620/Q500FC | |
| Low Alloy High Strength Steel Plate | 12Mn,15MnVN,16Mn,15MnV,14MnNb |
| Q295(A,B),Q345(A,B,C,D,E)Q390(A,B,C,D,E), Q420(A,B,C,D,E),Q460(C,D,E) | |
| Q500(D,E),Q550(D,E),Q620(D,E),Q690(D,E) | |
| SM490(A,B,C),SM490Y(A,B),SM520(B,C),SM570 | |
| St44-3,St52-3,St50-2, St60-2,St70-2 | |
| StE315,StE355,StE380,STe420,StE460,StE500 | |
| High Strength Structural Specs | A572M(Gr42.50,60,65),A633M9(A,B,C,D,E) |
| S275(JR,JO,J2G3,J2G4),S355(JR,JO,J2G3,J2G4,E395,E355,E360) | |
| S275N,S275NL,S355N,S355NL,S420N,S420NL,S460N,S460NL | |
| 50(A,B,C,D,DD,EE,F),43(A,B,C,D,EE),55(C,EE,F) | |
| Fe430(A,B,C,D),Fe510(B,C,D) | |
| WH60,WH410LK(BB41BF),WH490LK(BB503),Q550CFC | |
| WDB690,WDB780,WH70,WH80 IE0650,IE1006,SHT60 | |
| Corrision Resistance Steel Plate | 08Cu,16MnCu,Q245R|Q345R(HIC)\(R-HIC) |
| St37-3Cu3 | |
| A588M(A,B,C,K),A242MCL.2 | |
| Cor-TenB,10CrMoAL | |
| 16CuCr,12MnCuCr,15MnCuCr-QT,09CuPCrNi | |
| SMA400(AW,BW,CW),SMA400(AP,BP,CP),SMA490(AW,BW,CW) SMA490(AP,BP,CP),SMA570W,SMA570P | |
| Fe235W,Fe355W,WR50B,WR50C | |
| Bridge Steel Plate | 16q,16Mnq,16MnCuq/15MnVq,15MnVNq 14MnNbp/Q345q,Q370q,Q420q |
| A709M(Gr36,50,50W,70W) | |
| Construction, Structural Steel Plate | Q235GJ,Q345GJC.D-Z35,Q390GJ,Q460GJC |
| SN400(A,B,C),SN490(B,C) | |
| 275(D,E,EZ),355(D,E,EM),450(EM,EMZ) | |
| Alloy Structure Steel Plate | 15CrMo,20CrMo,30CrMo,35CrMo,20Cr, 40Cr,20Mn2,40Mn2,20CrMnMo,12Cr1MoV,20MnSi 30CrMnSiA,12CrMoVNi(RQ65),50Mn2V,42CrMo |
| 25CrMo4,34CrMo4,42CrMo4 | |
| Mold Wear Steel Plate | P20,718,P80,WSM30A |
| S45C-S55C | |
| 45-55,50Mn,SM45-SM55,SM3Cr2Mo,SM3Cr2Mo,SM3Cr2Ni1Mo | |
| NM360,NM400 | |
| Carbon Structure Steel Plate | Q235-Q275 |
| 10-55,20Mn-50Mn | |
| SS400/SM400(A,B) |
Manufacturing Technique
We offer custom cutting services for large steel plates to meet your precise requirements. By milling and grinding, we make the surface of the plate bright. We can also drill holes, construct specific angle degrees, and perform welding processes based directly on your engineering drawings.
Cutting Technology Standards:
For thickness under 30mm: High-precision laser cutting is utilized. For thickness over 30mm: Primarily OXY-cut and flame cutting methods are applied.
For steel plates with a thickness of 200mm, the intense heat generated during flame cutting may cause the steel plate to break at the angle parts. To ensure the highest quality delivery, our skilled workers will meticulously repair the angles to put them back into good condition.
Product Testing
CCarbon (C)
1. Improves deformation resistance and tensile strength.
2. Enhances hardness and wear resistance.
2. Enhances hardness and wear resistance.
CrChromium (Cr)
1. Enhances hardness, tensile strength, and toughness.
2. Provides anti-wear and corrosion protection.
2. Provides anti-wear and corrosion protection.
CoCobalt (Co)
1. Increases hardness and strength to withstand high-temperature quenching.
2. Enhances individual properties of other elements in complex alloys.
2. Enhances individual properties of other elements in complex alloys.
CuCopper (Cu)
1. Enhances corrosion resistance.
2. Enhances wear resistance.
2. Enhances wear resistance.
MnManganese (Mn)
1. Increases quenchability, wear resistance, and tensile strength.
2. Removes oxygen from molten metal.
3. Enhances hardness in large quantities (improves brittleness).
2. Removes oxygen from molten metal.
3. Enhances hardness in large quantities (improves brittleness).
MoMolybdenum (Mo)
1. Enhances strength, hardness, quenchability, and toughness.
2. Improves machinability and corrosion resistance.
2. Improves machinability and corrosion resistance.
NiNickel (Ni)
1. Enhances strength, hardness, and corrosion resistance.
PPhosphorus (P)
1. Enhances strength, machinability, and hardness.
2. High concentrations can cause cracking.
2. High concentrations can cause cracking.
SiSilicon (Si)
1. Enhances ductility.
2. Increases tensile strength.
3. Removes oxygen from molten metal.
2. Increases tensile strength.
3. Removes oxygen from molten metal.
SSulphur (S)
1. Small amounts are used to improve machinability.
WTungsten (W)
1. Increases strength, hardness, and toughness.
VVanadium (V)
1. Increases strength, hardness, and seismic resistance.
Frequently Asked Questions (FAQ)
Q: What dimensions are available for AH32 shipping steel plates?
AH32 shipping steel plates are available in thicknesses ranging from 8mm to 800mm, widths from 1500mm to 4200mm, and lengths from 6000mm to 18000mm.
Q: What cutting technologies do you use for different steel thicknesses?
For steel plates under 30mm in thickness, we use high-precision laser cutting. For plates with thicknesses exceeding 30mm, we primarily use OXY-cut and flame cutting methods.
Q: What deep processing services can you perform on the steel plates?
After cutting the large plates to general sizes according to your drawings, we can perform milling, grinding, angle making, polishing, hole making, welding, and fabrication of specialized parts.
Q: How do you handle cracking issues on thick 200mm plates during cutting?
During the flame cutting of 200mm thick steel plates, high temperatures can cause the material to break at the angle sections. Our workers manually repair these angles to restore them to good condition.
Q: Which elements are tested to ensure the quality and mechanical properties of the steel?
We monitor and test various alloying elements, including Carbon (C), Chromium (Cr), Cobalt (Co), Copper (Cu), Manganese (Mn), Molybdenum (Mo), Nickel (Ni), Phosphorus (P), Silicon (Si), Sulphur (S), Tungsten (W), and Vanadium (V) to achieve targeted strength, hardness, and corrosion resistance.