0102030405
China Inconel 600 601 Stainless Steel Rod Seamless Bar Suppliers - ASTM B167 B829 Factory Quality Assurance
Product Description
Product Parameter
| Material | Monel/Inconel/Hastelloy/Duplex Steel/PH Steel/Nickel Alloy |
| Shape | Round, Forging, Ring, Coil, Flange, Disc, Foil, Spherical, Ribbon, Square, Bar, Pipe, Sheet |
| Grade | Duplex: 2205(UNS S31803/S32205), 2507(UNS S32750), UNS S32760(Zeron 100), 2304, 904L |
| Others: 253Ma, 254SMo, 654SMo, F50(UNS S32100)F60, F61, F65, 1J22, N4, N6 etc | |
| Alloy: Alloy 20/28/31; | |
| Hastelloy: Hastelloy B/-2/B-3/C22/C-4/S/C276/C-2000/G-35/G-30/X/N/g; | |
| Hastelloy B / UNS N10001, Hastelloy B-2 / UNS N10665 / DIN W. Nr. 2.4617, Hastelloy C, Hastelloy C-4 / UNS N06455 / DIN W. Nr. 2.4610, Hastelloy C-22 / UNS N06022 / DIN W. Nr. 2.4602, Hastelloy C-276 / UNS N10276 / DIN W. Nr. 2.4819, Hastelloy X / UNS N06002 / DIN W. Nr. 2.4665 | |
| Haynes: Haynes 230/556/188; | |
| Inconel Series: | |
| Inconel 600/601/602CA/617/625/713/718/738/X-750, Carpenter 20; | |
| Inconel 718 / UNS N07718 / DIN W. Nr. 2.4668, Inconel 601 / UNS N06601 / DIN W. Nr. 2.4851, Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856, Inconel 725 / UNS N07725, Inconel X-750 / UNS N07750 / DIN W. Nr. 2.4669, Inconel 600 / UNS N06600 / DIN W. Nr. 2.4816 | |
| Incoloy: Incoloy 800/800H/800HT/825/925/926; | |
| GH: GH2132, GH3030, GH3039, GH3128, GH4180, GH3044 | |
| Monel: Monel 400/K500/R405 | |
| Nitronic: Nitronic 40/50/60; | |
| Nimonic: Nimonic 75/80A/90/A263; | |
| Specification |
Wire: 0.01-10mm Strip: 0.05*5.0-5.0*250mm Bar: φ4-50mm; Length 2000-5000mm Pipe: φ6-273mm; δ1-30mm; Length 1000-8000mm Sheet: δ 0.8-36mm; Width 650-2000mm; Length 800-4500mm |
| Product Characteristics |
1. According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2. According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc. |
| Standard | GB, AISI, ASTM, DIN, EN, SUS, UNS etc |
| Inspection | ISO, SGS, BV and so on. |
| Application | High temperature components such as turbine blades, guide vanes, turbine disks, high pressure compressor disks, machine manufacturing and combustion chambers used in the manufacture of aviation, naval and industrial gas turbines |
Pure Nickel
| Composition (%) | Ni +Co | Cu | Mn | C | Fe | Si | S |
|---|---|---|---|---|---|---|---|
| N2 | ≥99.98 | ≤0.001 | ≤0.002 | ≤0.005 | ≤0.007 | ≤0.003 | ≤0.001 |
| N4 | ≥99.90 | ≤0.015 | ≤0.002 | ≤0.01 | ≤0.04 | ≤0.13 | ≤0.001 |
| N5(NW2201 N02201) | ≥99.00 | ≤0.25 | ≤0.35 | ≤0.02 | ≤0.40 | ≤0.30 | ≤0.01 |
| N6 | ≥99.50 | ≤0.10 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | ≤0.005 |
| N7(NW2200 N02200) | ≥99.00 | ≤0.25 | ≤0.35 | ≤0.15 | ≤0.40 | ≤0.30 | ≤0.01 |
| N8 | ≥99.00 | ≤0.15 | ≤0.20 | ≤0.20 | ≤0.30 | ≤0.15 | ≤0.015 |
| N9 | ≥98.63 | ≤0.25 | ≤0.35 | ≤0.02 | ≤0.4 | ≤0.35 | ≤0.005 |
| DN | ≥99.35 | ≤0.06 | ≤0.05 | 0.02~0.10 | ≤0.10 | 0.02~0.10 | ≤0.005 |
Physical Properties
| Grade | Density | Melting point | Coefficient of expansion | Modulus of rigidity | Modulus of elasticity | Electrical resistivity |
|---|---|---|---|---|---|---|
| Ni200 | 8.9g/cm³ | 1446°C | 13.3 µm/m °C (20-100°C) | 81kN/mm² | 204kN/mm² | 9.6μW• cm |
| Ni201 | 1446°C | 13.1µm/m °C (20-100°C) | 82kN/mm² | 207kN/mm² | 8.5μW• cm |
Characteristic
Nickel 200 is commercially pure wrought nickel. It is highly resistant to various reducing chemicals. Nickel 200 is limited to service at temperatures below 315℃. Its thermal and electrical conductivity are higher than nickel alloys. Factory Direct supply Thk0.25mm 1.5mm 2mm 825 nickel base alloy steel plate sheet for sale Nickel 201 is the low-carbon version of Nickel 200. It is a substitute for Nickel 200 in Applications above 315℃.
Factory Direct supply Thk0.25mm 1.5mm 2mm 825 nickel base alloy steel plate sheet for sale
- 1. Has good resistance to reduction, oxidation, and nitriding medium corrosion;
- 2. Good stress corrosion cracking resistance at room temperature and high temperature;
- 3. Good resistance to dry chlorine and hydrogen chloride gas corrosion;
- 4. Good mechanical properties at sub-zero, room temperature and high temperature;
- 5. Due to its good creep rupture strength for the control of carbon content and grain size, it is recommended to be used in a working environment above 700 ° C.
Application
Product Inventory
Quality Control
Packing & Delivery
- • Carton with water proof paper and protective foam inside
- • Standard wooden case
- • As clients' requirements
Frequently Asked Questions (FAQ)
Q1: What is the primary difference between Nickel 200 and Nickel 201?
Nickel 200 is commercially pure wrought nickel with excellent resistance to reducing chemicals but is limited to service temperatures below 315°C. Nickel 201 is the low-carbon version of Nickel 200, making it suitable for applications operating above 315°C.
Q2: What shapes and specifications of nickel alloys can you supply?
We supply a wide range of shapes including Round, Forging, Ring, Coil, Flange, Disc, Foil, Spherical, Ribbon, Square, Bar, Pipe, and Sheet. Product dimensions range from wires of 0.01-10mm to sheets of 0.8-36mm thickness, depending on your specifications.
Q3: Which international manufacturing standards do your products meet?
Our superalloys and nickel products are manufactured in compliance with international standards including GB, AISI, ASTM, DIN, EN, SUS, and UNS.
Q4: What testing and quality inspections do you support?
We maintain strict quality control and support professional third-party inspections such as ISO, SGS, and BV to ensure the mechanical properties and chemical compositions meet your requirements.
Q5: How are the products packaged to prevent damage during shipping?
Products are securely packaged using cartons with waterproof paper and protective foam inside, standard export wooden cases, or customized packaging solutions tailored to specific client requirements.